Heinrich Brothers, Inc. will help you find a Conveyor Roller or Conveyor Pulley to meet your conveying needs. We supply replacement rollers and replacement pulleys to fit most brands of conveyors. Custom types and custom sizes of rollers are also readily available. Whether you require a roller for a powered conveyor or a gravity conveyor, we can help. View Roller Measurement Guide Roller Quote Form - Short Form Roller Quote Form - Long Form

TECHNICAL INFO Tubes Sizes range from 1” diameter up to 12” diameter and anything in between Tube Thickness from 18 ga. up to 1” thick Materials include: Mild Steel; Galvanized Steel; Stainless Steel; Aluminum; PVC; Industrial Pipe Plating options for Zinc, Chrome, or Nickel Heat Treating option for a surface hardness up to Rockwell C 62 Assembly Options Include: Press Fit; Crimped (Swaged); Welded End Plates (Bosses) with internal bearings; Fully Welded Tube & Axles Axles Sizes range from 1/4” to 3 7/16” Shapes include Hex, Round, or Square Materials include Mild Steel and Stainless Steel Center Puck option to prevent axle deflection and increase load capacity Axle Retentions include: Spring; Cotter Pin; Hog Ring; Snap Ring; Tapped Ends; Threaded Ends; Milled Ends; Keeper Bar Slot Bearings Non-Precision - A full ball complement in a stamped metal body - Zinc plated for better corrosion resistance - Recommended for light loads and slow speeds - Not intended for quiet operation - Very cost effective Semi-Precision - Made of machined steel with tighter tolerances than non-precision bearings - Includes a ball retainer to keep the balls separated and evenly spaced  - Capable of higher speeds and higher load capacities than non-precision bearings - Available in stainless steel ABEC Precision - Made from high quality, heat treated steel and ground to a micro finish with tolerances much tighter than semi-precision bearings - Capable of even higher speeds and higher loads than semi-precision bearings - Sensitive to axle deflection which may limit load capacity in long rollers - Recommended for quiet operations - Many styles available including polypropylene housed, insert, agricultural, Framesavers, and more Bushings - Solid pieces of material with no moving parts - Materials include UHMW, Hardwood, Teflon, Nylon and more  - Recommended for use in extreme temperatures, dirty environments, corrosive environments, or sanitary conditions depending on the material Plastic Bearings - Stainless steel balls in a molded plastic body - Recommended for highly corrosive environments or underwater - No lubrication required

TECHNICAL DOWNLOADS Bearings 1.15 to 3.29.pdf Bearings 3.5 to 6.298 Roller Acc Wheels and Ball Trans.pdf Rollers 1 to 2.25 Dia.pdf Rollers 2.25 to 4 Dia.pdf Rollers 4 to 8 Dia and Taper Rollers.pdf Roller Overview.pdf